Duct Fabricator
Temporary
GCG Engineering Services
With a legacy of over 40 years, GCG Engineering Services excels in delivering cutting-edge solutions and aftermarket support for precision instruments, metering systems, flow controls, heat exchangers, automation, plus electrical & instrumentation bulk trading. Renowned for its reliability and expertise, GCG Engineering Services supports the Oil & Gas, Water, Power, and Industrial sectors, enhancing operational efficiency and delivering unmatched value across the GCC region.
Job Description
- Fabricate HVAC ductwork, fittings, and accessories as per approved shop drawings and fabrication details.
- Read and interpret HVAC fabrication drawings, duct layouts, and cutting schedules.
- Measure, mark, cut, bend, fold, notch, and assemble GI, stainless steel, and aluminum duct sheets using appropriate fabrication tools and machinery.
- Install duct stiffeners, flanges, cleats, corners, and reinforcement as specified in fabrication drawings.
- Operate fabrication equipment such as guillotine shears, press brakes, Pittsburgh lock machines, lock formers, notchers, rollers, grooving machines, and spot welding machines safely and efficiently.
- Ensure fabricated duct sections comply with approved dimensions, tolerances, and quality requirements.
- Inspect fabricated components for defects before dispatch to the installation team.
- Minimize material wastage by following approved cutting plans and fabrication procedures.
- Maintain fabrication tools, machines, and work areas in good operating condition.
- Coordinate with the HVAC Foreman regarding fabrication priorities and production schedules.
- Assist in loading, unloading, and proper storage of fabricated duct sections.
- Comply with company HSE policies and wear appropriate PPE during fabrication activities.
Qualifications
- ITI / Trade Certificate in Sheet Metal, Mechanical, HVAC, or an equivalent technical trade.
- Minimum 3–5 years of experience as a Duct Fabricator in HVAC projects.
- Experience in Oil & Gas, Petrochemical, Refinery, LNG, or Industrial EPC projects is preferred.
- Experience in fabrication of GI, stainless steel, and aluminum ductwork is highly desirable.
Additional Information
- Must be able to work in outdoor environments under varying weather conditions.
- Will be required to work on high platforms or confined spaces, adhering strictly to safety standards.
- May be required to work overtime or extended shifts based on project deadlines.
Vacancy posted 23 days ago
Similar jobs that could be interesting for youBased on the Duct Fabricator in Abu Dhabi vacancy
- ...enhancing operational efficiency and delivering unmatched value across the GCC region. Job Description Install, fabricate, assemble, and repair duct systems in oil and gas facilities. Measure and cut ducts to the required size using appropriate tools and...
- ...Job Title: Aluminum Fabricator Location: UAE Industry: Manufacturing Job Description We are hiring Aluminum Fabricators for a reputed manufacturing company in the UAE. This is an excellent opportunity for candidates looking to build an international career...
- ...We are looking for Metal Fabricators who can read drawings, measures, cuts, bends and assembles extruded and bended thin metal profiles into frames and components of metal doors. Skills & Expertise required : Read & understand Workorder and drawings provided....
- ...We are looking for Assistant Fabricator, capable to do all general grinding works (heavy thick plate edge grinding, heavy wall piping grinding, Nozzles cut out grinding etc.). Candidates shall also be able to do chip back grinding, gouging, gas cutting and pug cutting...
- ...JD OF FABRICATION SUPERVISOR Supervising and coordinating the activities of workers involved in metal fabrication processes (structural fabrication) Ensuring compliance with safety regulations and maintaining clean, orderly, and safe work areas To follow...
- ...semi-permanent, and temporary infrastructure, including tension fabric shelters, trailer offices, lodging units, water closets, metal ladders... ...Ductwork installation and repair Metal patchwork (excluding ducts) Roll-up door installation and repair Welding...
- ...SS), galvanized iron (GI), and other sheet metal cladding over insulated HVAC ducts, chilled water lines, process piping, valves, flanges, vessels, tanks, and equipment. Measure, fabricate, cut, bend, roll, and fit cladding sheets according to approved drawings and site...
- ...activities. Support installation of HVAC systems including ducting, piping, FCU, AHU, VRF/VRV systems, and related equipment.... ...shifting, and arranging HVAC materials and tools. Assist in duct fabrication, insulation works, pipe fitting, and equipment installation...
- ...Willingness to work in remote locations, including offshore or desert environments, as required. Technical expertise in duct fabrication and installation. Ability to use hand and power tools safely. Strong problem-solving and teamwork abilities. Effective...
- ...sectors, enhancing operational efficiency and delivering unmatched value across the GCC region. Job Description Lead and direct duct fitters, pipe fitters, insulators, and helpers in carrying out daily construction activities. Assign daily tasks to the workforce...
- ...Oxygen, Pneumatic, Water/Waste, Fuel, Hydraulic, and Landing Gears systems. • Prepare technical drawings (such as mechanical diagrams, ducts/pipes/hoses installations and repairs) as required. • Coordinate with vendors and suppliers during design phase and selection of...
- ...utility works (potable water, irrigation, fire-fighting, electrical, telecommunications, and other services) including trenching, ducting, chambers, and connections. Review and comment on contractor submissions such as method statements, shop drawings, traffic management...
- ...lighting network designs and external electrical distribution provisions. Assess telecommunications and IT network designs including ducting routes, fibre layouts, manhole schedules, and authority provider requirements. Verify utility corridor coordination and...
- ...process facilities. Perform HVAC design calculations such as cooling and heating load calculations, ventilation requirements, duct sizing, pressure loss calculations, equipment selection, and noise analysis. Prepare and review HVAC layouts, duct routing drawings...
- ...hotel laundry operations, including supervisory responsibilities. # Strong knowledge of commercial laundry equipment, chemicals, and fabric care procedures. # Experience in managing laundry attendants and coordinating daily laundry activities. # Ability to maintain...
- ...Prepare and review HVAC design deliverables, including design basis reports, calculations, datasheets, specifications, HVAC layouts, duct routing drawings, and equipment schedules. Conduct cooling and heating load calculations, ventilation studies, equipment sizing...
- ...non-hazardous offshore areas. Prepare engineering calculations for: Ventilation rates, Equipment sizing, Pressurization systems, Duct sizing and pressure drop calculations, Fresh air and exhaust requirements Develop HVAC layouts, equipment arrangement drawings,...
- ...to grow their career in the UAE. The ideal candidate should have practical knowledge of cable tray installation, trunking, and fabrication work. Immediate joiners with relevant UAE experience will be given preference. Key Responsibilities: • Perform electrical installation...
- ...experience with AutoSpool/Spool Gen software and AutoCAD Be familiar with client project scope and specifications. Draw shop pipe fabrication spools from client drawings utilizing AutoCAD. Do calculations necessary to support assigned work. Perform drafting to...
- ...Responsibilities # Prepare detailed shop drawings, construction drawings, and coordination drawings. # Develop structural steel fabrication and erection drawings. # Prepare reinforcement detailing (rebar drawings) as per approved structural designs. # Produce MEP...
- ...attention to detail with a proven track record of maintaining high standards of cleanliness and presentation. Knowledge of laundry and fabric care, including experience with delicate and specialist textiles. Understanding of health & safety and safe use of cleaning...
- ...personnel , management of QC inspectors Knowledgeable in codes and standards , ADNOC specifications , SHELL DEP, Familiar with site fabrication , construction and erection activities. What you will need to have: Bachelor's degree in Mechanical or Metallurgical...
- ...efficiency and delivering unmatched value across the GCC region. Job Description Assist pipe fitters and welders during piping fabrication, installation, and erection activities. Support in handling, shifting, loading, and unloading of pipes, fittings, valves, and...
- ...Job Title: Pipe Support Detailer Department: Engineering / Piping Job Requirement: Develop and prepare detailed fabrication drawings for pipe supports using AutoCAD. Collaborate with piping detailers and engineers to interpret project specifications...
- ...Job Title: MIG & TIG Welder Location: UAE Industry: Fabricator Job Description We are hiring MIG & TIG Welders for a reputed manufacturing company in Dubai, UAE . This is an excellent opportunity for candidates looking to build an international career...
- ...Familiarity with ASME, ANSI, API, and project-specific piping standards. Knowledge of piping materials, fittings, valves, and fabrication techniques. Strong knowledge of piping installation practices. Additional Information Willingness to work in remote...
- ...• AI/LLM-powered capabilities — document intelligence, classification, extraction, decisioning • Pipelines into our Microsoft Fabric Lakehouse (Spark) — credit intelligence, analytics, reporting • Schema evolution done right — Liquibase, hundreds of versioned changesets...
- ...and delivering unmatched value across the GCC region. Job Description Lead and direct pipe fitters, welders, riggers, fabricators, grinders, and helpers in executing daily piping activities. Assign daily work to the crew as instructed by the Piping Supervisor...
- ...efficiency and delivering unmatched value across the GCC region. Job Description Supervise and coordinate piping installation, fabrication, erection, testing, and reinstatement activities at the project site. Manage piping foremen, pipe fitters, welders, helpers,...
- ...opportunity is ideal for professionals with UAE procurement experience who are eager to contribute to a fast-paced engineering and fabrication environment. The successful candidate will play a key role in managing procurement activities, coordinating with internal...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Duct Fabricator. Be the first to apply!
